This product effectively and quickly dissolves and removes wax and dirt from floors made of various materials.
Instructions
1.Apply this product evenly on the floor, leave for several minutes, then clean with a floor cleaner or scouring pad, and then rinse with plenty of water.
2.This product can be used diluted with water, as necessary.
Notes
1.Do not mix this product with bleach, detergent, or any other chemical agents. This product is slightly odorous but not pungent. If an abnormally pungent smell occurs during use, stop use immediately and rinse with clear water to remove any residual bleach or other cleaning agent before resuming.
2.Ventilate the environment, and wear shoes and plastic gloves during using. In confined spaces, be sure to wear a chemical protective mask. When using in large quantities, wear chemical goggles to prevent splashing in your eyes and rubber boots to prevent the agent from splashing over your feet.
3.If this product comes in contact with skin, wash with soap and rinse with plenty of water. In case of contact with eyes, rinse with plenty of water for at least 15 minutes and seek medical attention immediately. Drink plenty of milk and seek medical care if accidentally ingested.
4.This product may discolor or deteriorate metal, glass fiber, plastic, inapplicable floor materials, clothing, shoes, and other materials, so please take care to avoid contamination with this product. In case an unintended surface is contaminated with this product, rinse with water immediately.
5.This product must be stored in its original container and not transferred into any other container. Be sure to tighten the container lid and store this product in a place cool out of reach of children.
Main ingredients: wax remover agent, decomposition agent, interface active agent, etc.
product content
