J-7 Quick-Dry Floor Repair Agent
![](https://jantislip.com.tw/images/Product/J-7/J-7_1.jpg)
Product information:
J-7 quick-drying floor repair agent is a two-liquid mixed repair material, which dries quickly and resists heavy pressure. It can repair damaged mixed ground surfaces and deep holes by adjusting the proportion of the mix. This product is paste-like after being mixed with two liquids, is solidified under water, and can be used to repair and stop leakages under low pressure. It is a multifunctional and fast-drying floor repair agent.
Applicable surfaces: Washed terrazzo floors, terrazzo floors, epoxy floors, cement floors, stone, and metal.
Instructions for use:
1. Clean and dry the floor to ensure it is free from oil, moisture, and dust.
2. Pour Agent A and Agent B into a mixing bucket at a ratio of 1:5, and stir well to ensure product is mixed evenly (tip the bucket slightly; if paste does run, add the required amount of Agent B and stir. If using the product to level uneven surfaces, add a little water to adjust the consistency).
3. Use a trowel to fill the damaged part of the floor with the repair agent.
4. Use product three 3 minutes after stirring. Product dries in about five minutes, and pressing time is about 30 minutes. Optimal drying time is about 24 hours.
Attention:
1. If using the product on a deep hole, adjust the mixing ratio to a paste-like non-running state. Fill hole to a depth of nine points first, and then use the original ratio (Agent A and Agent B 1:5) of product to fill the remaining hole to ensure a flat surface.
2. Re-seal any unused product and store for up to three years.
3. It is not recommended to mix all the materials together at once; add bits of each agent and mix well before adding more to ensure an even product and save wastage and costs.
4. Stir evenly by hand as much as possible. Using electric tools to stir will generate heat energy which can accelerate the drying time of the repair agent.
Product specification:
5 kg of resin (Agent A) and 20 kg of sand (Agent B).
The recommended mixing ratio of Agent A and Agent B is 1:4, (1 kg of Agent A and 4 kg of Agent B).
Color: Neutral shade after mixing.
Package: 25 kg/group (5 kg of resin and 20 kg of cement sand).
Ingredients: Water-based chloride, composite cement sand, aggregate filler, and expansion aid.
|