J-1 Common Anti-Slip Coating
(One-liquid oily formula)

Product information:
1. Applicable environments: Can be used in arcades, bathrooms, stairs, washed terrazzo slopes, wooden plank roads, swimming pools, kitchen, factory, ditch covers, and other surfaces.
2. Applicable base: Tiles, stone, washed terrazzo, terrazzo, glass fiber reinforced plastic, metal, glass, wooden floors, cement floors, and epoxy floors.
3. One-liquid oily coating that can quickly improve the anti-slip performance of the floor, easy to use, and has remarkable anti-slip effect.
4. It can be applied to various floor surfaces, and dried quickly (surfaces can be used after two hours.
5. It has high friction resistance and excellent anti-skid effect, and can be used in indoor and outdoor wet and slippery environments.
6. Especially recommended for kitchens, iron slopes, and factory floors.

Instructions for use:
1. Applying tools: Roller brush, paint tray, electric mixer, paper tape, gloves.
2. Clean oil, moisture, and dust from the surface before use to ensure best results.
3. Before use: Stir the solution in a mixing bucket and mix well. It is recommended to use an electric mixer.
4. Two coats of the anti-slip solution are required. Apply the product to the surface with a roller brush, and wait about 30 minutes in between coats.
5. The complete drying time after two coats is two hours.
6. If the product is too thick to apply after mixing, add a sufficient amount of banana oil to dilute it.
7. Coverage: 
    1 gallon: 2.5 square meters (two coats).
    5 gallons: 12.5 square meters (two coats). 　

Attention:
If using on a metal surface with a smooth electroplated layer or similarly smooth surface, apply a primer first (J-4 Primer) to increase the bonding strength. A metal surface without an electroplated layer does not require a primer. 　

Package: 1 gallon, 5 gallons.
Color: Grey and green.
Ingredient: A composite coating composed of a variety of materials.